Concrete Foundation Repair Tips

Types of Foundation Stabilization

So, you have finally consulted a concrete foundation repair contractor, and they have told you that you must have your foundations stabilized. Don’t panic, this is actually good news, as you do not have to replace the entire foundation. Which then begs the question of what exactly is foundation stabilization? In a nutshell, it is propping your home with something that is not your pre-existing foundation. This is what will be discussed in this article.

Steel Piers

This is a repair that most structural engineers recommend, as it is a solid and proven method that will stabilize foundations that have begun to either shift or sink. This method will use either galvanized or epoxy-coated steel pipes which are connected together. The structural engineer then uses a hydraulic ram to drive them into the stable, load-bearing soil that is under your home. This raises and supports your home to stop any further settlement.

Helical: Steel Piers

These are actually steel pipes that come with spiral blades on the ends. The front will have one or more spirals attached, and this is what provides the necessary bearing capacity to the pipes. This foundation repair allows the piles to be twisted deep into the ground with the aid of a hydraulic torque motor.

Concrete Press Piles

These are concrete columns that are pushed into the ground under the pre-existing foundation. These can be installed faster than any of the aforementioned. They can be used immediately after the installation process is completed, and do not require any time to harden as poured concrete piers do. However, unlike steel piers, they will not be attached to the foundation. This makes concrete piles more likely to shift in time.

For information pertaining to the concrete foundation repair services and products On Your Side Foundation Repair has to offer, please do not hesitate to dial this number (903) 224 8560 now, we are based in the Greenville, TX area.

Review Us